Tattu TA3200 Charger For 12S1P Lipo Batteries

$42,131.00 Sale Save

Item is in stock Only 0 left in stock Item is out of stock Item is unavailable

 

INSTRUCTION

TA3200 charger is capable of charging 2 sets of lithium batteries simultaneously. The maximum power output is 750W under 100-120V and 12W under 180-240V per channel. User can select between Charging mode and Maintenance mode. Charging current is adjustable between 10A, 20A and 30A. It also has over-current, over charging, over temperature, safety cut off, fast equilibrium and status indicator functions. With double LCD display equipped, the charger automatically indicates real time charging status, charging voltage, charging current, charging time, battery capacity and cell voltage.

SPECIFICATIONS

- Input: 100-240V, 18A, 50/60Hz
- Output: Max 50.4V, Max 25A
- Max Output Power: 100-120V, 750W×2CH /180-240V, 1200W×2CH
- Type of Battery: LiPo / Smart Battery
- Cell Count:12S
- Channel Count: Dual Channel (10 Channels with 2 charging managers)
- Balance Tolerance: ±20mV
- Input Protection: Over Current Protection
- Output Protection: Over Voltage / Under Voltage / Short Circuit / Over Temperature / Reverse Polarity
- Working Environment Temperature: 0℃-40℃/32℉~104℉
- Cooling System: Cooling Air
- External Upgrade Port: Micro USB
- Dimensions: ≈325×190×280.5mm
- Weight: ≈9.2kg

 OPERATION

The TA3200 charging manager is a dual channel charger with independent outputs. Each channel operates independently. The following is a single channel example. When the charger is used incorrectly or there is a failure, the charger will display an error message. See examples below.

  1. Startup and Self Test
    Be sure all cable connections are correct. Power the unit on. The LCD display, Led Indicator lights should come on. When the charger completes, it’s self test the buzzer will sound.
    2. Operation Modes
    Charging Mode: Charging Mode will balance charge the battery quickly. Maintenance Mode: When a battery has been on the shelf for a long period of time, it is recommended to use maintenance mode. If the battery life declines or the battery is out of balance greater than 50mV, Maintenance Mode will charge or discharge the battery using a small current to put the battery into proper storage voltage.
    3. Setting Working Current
    Use the current switch to complete the current setting based on battery capacity.
    4. Charging
    Long press the charge button for more than 2 seconds to begin charging immediately, or charge will start automatically after 10 seconds after connections are made.
     * Red Light On: the charger is charging the battery and the LCD display indicates real time charging status.
     * Green Light On: Charging is complete.

Tattu TA3200 User Manual

Note: When using Continuous Working Mode, the charger automatically runs a series of operations.
These automatic operations include starting, stopping, testing and switching. When using Continuous Working Mode, the charger will resume charging automatically if the battery is not removed within 30 seconds of pressing the stop button.